EAA AirVenture - Join us July 22-28, 2024, Oshkosh Wisconsin - Booth 387-392 Main Display Area

For 51 weeks a year, EAA is an international community of more than 240,000 members that nurtures the spirit of flight through a worldwide network of chapters, outreach programs, and other events. But for one week each summer, EAA members and aviation enthusiasts totaling more than 500,000 from 80 countries attend EAA AirVenture at Wittman Regional Airport in Oshkosh, Wisconsin, where they rekindle friendships and celebrate the past, present, and future in the world of flight. The World's Greatest Aviation Celebration® has it all when it comes to aircraft. Warbirds. Vintage. Homebuilts. Ultralights. Some you would normally find in a hangar at your local airport, others so unique they are the only one of their kind.

Read More

Daher Unveils The Kodiak 900

A Legendary Utility Aircraft Now Becomes The Ultimate Getaway Vehicle

EAA AirVenture, Oshkosh, Wisconsin, July 25, 2022 – The Kodiak 900 made its world debut at AirVenture Oshkosh today with Daher’s introduction of this larger, faster version of the robust and rugged Kodiak 100 – filling out the company’s airplane product line in joining the TBM 910 and TBM 960 very fast turboprop aircraft.

Inheriting the Kodiak 100’s remarkable qualities as a backcountry STOL (short takeoff and landing) and multi-role airplane, the Kodiak 900 marks a further step with its fuselage length extension of 3.9 feet to provide more passenger room and cargo space, a cruise speed increase to 210 KTAS, and a greater useful load while offering a maximum range of 1,129 nm.

In addition to these enhancements, the Kodiak 900’s operating economics have been improved, with a nine percent reduction in specific fuel consumption – which are in double digits when compared to competitors. This lowers the cost-per-seat-mile and the direct operating costs for commercial operators.

“This is another answer to the commitment of enhancing sustainability and improving the carbon footprint of general aviation,” explained Nicolas Chabbert, the Senior Vice President of Daher’s Aircraft Division. “The Kodiak 900 is in a category of its own: a highly versatile unpressurized utility turboprop airplane that can carry impressive payloads while cruising comfortably at 210 KTS in refined luxury.”

The Kodiak 900 was certified by the U.S. Federal Aviation Administration on July 20, and deliveries will begin in 2023. Production of the Kodiak 900, along with the Kodiak 100 in its latest Series III version, is performed at the Sandpoint, Idaho facility of Daher’s Aircraft Division.

“Today’s official unveiling of the Kodiak 900 underscores the Daher parent company’s firm commitment to the constant improvement of its aircraft product line,” added Daher CEO Didier Kayat. “It follows our launch of the latest TBM family member – the TBM 960 – just three months ago.”

The Kodiak 900’s stretched fuselage provides a total cabin volume increase of 20 percent to 309 cubic feet, and it features an all-new interior that couples Daher’s expertise in creating refined, luxurious interiors for the TBM aircraft family with the Kodiak’s rugged heritage to create an cabin that is versatile and well-appointed.

With the new Summit+ passenger seats that are multi-directional, the Kodiak 900 responds to a wide array of user requirements and mission profiles. The interior can be arranged in multiple configurations – from a double club layout to all-forward-facing arrangement. The Summit+ seats – which also are being used in the Kodiak 100’s upgraded interior – can be removed entirely for maximum space and payload. Individual amenity panels that include USB-a and USB-c ports, LEMO airplane-powered headset jacks, cupholders and phone holders are now at every seat.

The new seats come with quick-release handles that allow them to easily slide in the seat-tracks or be removed entirely by one person without the need for tools or specialized equipment. Each seat reclines and has two armrests and a headrest with bolstering and padding, ensuring comfort on even the longest-range trips.

The cabin retains all of the Kodiak 100’s versatility. Ample cargo tie downs throughout enable maximum flexibility for securing down just about anything. Cargo carrying capability and three entry/exit doors enable the entire cabin to be used for cargo, if needed.

A new color pallet has been introduced for the Kodiak 900’s standard interior. The seats come in black, while durable and weather-resistant black carpeting is installed throughout. The sidewalls, headliner and rear bulkhead utilize the popular composite material from the Kodiak 100. Industry-leading sound damping has been incorporated to the Kodiak 900’s unpressurized interior, creating one of the quietest cabin experiences for an aircraft in its class.

One of the most apparent differences in the Kodiak 900’s airframe is the addition of a fifth set of passenger windows, which adds to the brightness and the feeling of spaciousness.

The airframe has been re-engineered to maintain the Kodiak’s high robustness, and refinements have been introduced in a major effort to reduce drag – with such changes as replacing the external pilot entry step with a foldable ladder, as well as adding flaptrack covers on the wing and wheel fairings to the landing gear. A significant internal airflow “clean up” was performed as well, with the ducts, inlets, and air intakes redesigned, modeled and engineered for low drag.

The use of wheel fairings is another of the Kodiak 900’s noticeable visual differences. They have been certified as “secondary structures,” built to strict FAA standards and subjected to the same rigorous analysis and testing for such components as the cargo pod. Their robust build quality ensures the wheel fairings can withstand off-pavement landings, and the main gear wheel fairing can be used as a step for pre-flight operations or single-point refueling. Access doors make the tires’ valve stem easily accessible, avoiding the need to remove the wheel fairings for general inspection or minor maintenance of the brakes and tires.

Removal and reinstallation of the wheel fairings is a pilot-maintenance function – ensuring that owners and operators can easily handle them without a maintenance logbook entry.

As the Kodiak 900 sits higher in the rear than the Kodiak 100, a complete redesign of the rear main cargo door was made. The integration of additional steps create an easier entry and exit point for passengers, while also facilitating the loading of payloads. There is an added handhold to assist with the added height of the plane on entry/exit. The door retains the Kodiak’s unique clamshell design with fold-flat capability, allowing for easy loading/unloading of large bulk items, pallets, or stretchers for MEDEVAC customers.

Daher’s Kodiak Care four-year maintenance program includes scheduled maintenance of the aircraft up to 1,000 total flight hours, or through the fourth annual inspection.

The Kodiak 900 is powered by Pratt & Whitney Canada’s 900-shaft horsepower PT6A-140A turboprop engine, which is tailored for the utility aircraft market and optimized for rugged, demanding conditions. Its all-aluminum gearbox housings have better corrosion resistance, and the engine delivers the best “hot and high” performance in its class. The PT6A-140A is part of Pratt & Whitney Canada’s next-generation PT6A-140 series, which already has logged more than two million hours of flight.

A new constant speed, full-feathering and hydraulically-actuated five-blade composite propeller from Hartzell is used on the Kodiak 900. Its design and low 1,900 rpm setting contribute to the low noise level of 79.5 dB, allowing the aircraft to operate in the most strictly regulated noise sensitive areas.

In the Kodiak 900’s engine bay, many components have re-engineered to maintain key features of the Kodiak 100 version. The air-intake system has been optimized for low starting temperatures that allow for multiple battery engine starts per hour – a requirement for such high-cycle customers as skydive operators and in short-haul commercial flights. New additive manufacturing processes (3D printing) are applied in producing the alternator cooling shroud and some of the cowl exit ducts, reducing complexity and weight.

For special missions, the Kodiak 100’s simple and rugged design, renown stability and carefree handling characteristics are further enhanced with the Kodiak 900’s larger cabin volume, higher speed, faster climb and more rapid arrival at altitude/on station. Advantages for critical missions include its nine-plus hour loiter time, slow flight handling characteristics, and the 210 KTAS sprint/cruise capability.

In ISR (intelligence, surveillance and reconnaissance) operations, the Kodiak 900’s 300-amp starter/generator and 60-amp alternator meet high-demand electrical needs for mission systems, and the aircraft is easily adaptable to state-of-the-art equipment. It can carry a full team of specialists with the low vibration levels of a turboprop aircraft

The Kodiak 100’s proven capabilities in the firefighting support role are further improved with the Kodiak 900’s ability to climb more rapidly and fly faster. It also retains the Kodiak 100’s STOL characteristics for delivering crews and supplies to off-airport strips. For law enforcement, public safety and agency operations, the Kodiak 900’s multi-mission capability is enhanced with its increased cabin volume and convertible interior. In the air ambulance/MEDEVAC role, the larger cabin accommodates two stretchers, and its increased speed is vital when time is of the essence.

The Kodiak 900’s increased cabin capacity and rugged airframe make it a perfect platform for cargo and small package freight – offering an optimum combination of speed, payload and range.

Development of the Kodiak 900 began in 2016. Three test aircraft have been built to date: a static test airframe for structural testing, a flying prototype for flight testing, and the first conforming production aircraft for FAA function and reliability testing. Maiden flight of the Kodiak 900 occurred on February 28, 2020. The test program has accumulated over 600 hours of flight testing and 800-plus hours of ground runtime across the test fleet.

About Daher – www.daher.com

Daher is an aircraft manufacturer and an industry and service equipment supplier. Daher asserts its leadership in three main businesses: aircraft manufacturing, aerospace equipment and systems, logistics and supply chain services; and achieved a turnover of 1.2 billion euros in 2021. With the stability provided by its family ownership, Daher has been committed to innovation since its creation in 1863. Today, present in 13 countries, Daher is a leader in Industry 4.0, designing and developing value-added solutions for its industrial partners.

About Daher’s aircraft product line – www.kodiak.aero / www.tbm.aero

Daher manufactures two families of single-engine turboprop airplanes: the Kodiak utility aircraft in Sandpoint, Idaho, USA, and the very fast pressurized TBM in Tarbes, France.

The Kodiak 100 Series III is an unpressurized 8-10-seat airplane equipped with Garmin’s G1000 NXi avionics, capable of operating on uneven and unimproved runways, or on water in the amphibious version. Its unique combination of robust construction and remarkable 3,530 lb. useful load has resulted in many additional applications for the Kodiak, including special missions, medevac, as a skydiving platform and more.

Daher introduced the larger Kodiak 900 version in 2022, featuring a fuselage length extension of 3.9 feet for more passenger room and cargo space, a cruise speed increase to 210 KTAS, and a greater useful load while offering a maximum range of 1,129 nm.

Current production versions of Daher’s TBM family are the TBM 910, equipped with Garmin’s G1000 Nxi avionics system, controlled by a keypad; and the TBM 960, featuring Pratt & Whitney Canada’s PT6E-66XT engine and a dual-channel digital Engine and Propeller Electronic Control System (EPECS), an autothrottle, Garmin’s G3000 avionics with touchscreen controller, and the HomeSafe™ emergency autoland system. Both models offer increased automation and superior performance.

As of June 30, 2022, a total of 309 Kodiak and 1,079 TBM aircraft had been delivered to international owners and operators, with the global fleet accumulating some 2.2 million flight hours.

Read Next

Daher Marks Kodiak Delivery #300